Zinc Base Die Cast Alloy #2
Product Menu | Properties | Availability | Uses
Specifications: ASTM B240*
| Element | Al% | Zn% | Mg% | Si% | Cu% | Fe% | Pb% |
| Maximum | 4.3 | BAL | 0.05 | 0.035 | 2.9 | 0.075 | 0.004 |
| Minimum | 3.9 | 0.025 | -- | 2.6 | -- | -- | |
| Element | Sn% | Cd% | Ni% | Mn% | Cr% | Ti% | Sb% |
| Maximum | 0.002 | 0.003 | 0.02 | 0.05 | 0.02 | X | X |
| Minimum | -- | -- | -- | -- | -- |
*Ritchey Metals will adjust these specifications to suit the
needs of an individual customer upon request.
Properties
| Mechanical | Die Cast |   |
|||
| Ultimate Tensile Strength | 52 psi x 103 (358.5 Mpa) | ||||
| Yield Strength - 0.2% Offset | -- | ||||
| Elongation | 7% in 2" | ||||
| Shear Strength | 46 psi x 103 (317.0 Mpa) | ||||
| Hardness: Brinell | 100 | ||||
| Impact Strength | 35 ft-lb (47.5 J) | ||||
| 1/4 in2 specimen unnotched | |||||
| Fatigue Strength Rotary Bend | 8.5 psi x 103 (59 Mpa) | ||||
| 5 x 108 cycles | |||||
| Comprehensive Yield Strength | 93 psi x 103 (641 Mpa) | ||||
| 0.1% Offset | |||||
| Modulus of Elasticity | 12.4 psi x 106 (85.5 Mpa x 103) | ||||
| Physical | |||||
| Density | .24 lb/in3 (6.6 g/cm3) | ||||
| Melting Range | 715-734 oF (379-390 oC) | ||||
| Electrical Conductivity | 25% IACS | ||||
| Thermal Conductivity | 60.5 BTU/ft/hr/oF (104.7 W/m/hr/ oC) |
||||
| Coefficient of Thermal Expansion | 15.4 microinches/in/oF (27.4 microinches/mm/oC) |
||||
| 68-212oF(100-200oC) | |||||
| Specific Heat | 0.10 BTU/lb/oF (419 J/kg/oC)) | ||||
| Pattern or Die Shrinkage | 0.007 in/in | ||||
Availability
The following links are technical drawings of our products in pdf format. You will need Adobe Acrobat to view these files.
Bar Ingot Bundle - Self-palletizing or on wooden pallets
Margash Bundle - Self-palletizing or on wooden pallets
Small Sow
Ritchey Metals routinely works with customers to alter our products to fit specific needs.
