Ritchey Metals Co. -- Pittsburgh, PA: V-12 Zinc Hardener Alloy

Ritchey Metals' Products

V-12 Zinc Hardener Alloy
Product Menu | Properties | Availability | Uses

Specifications: ASTM B327*

Element Al% Zn% Mg% Si% Cu% Fe% Pb%

Maximum 12.6 BAL 0.12 X 0.25 0.07 0.005

Minimum 11.7 0.075 -- -- --

Element Sn% Cd% Ni% Mn% Cr% Ti% Sb%

Maximum 0.003 0.004 X X X X X

Minimum -- --

X= Element not in Specification.
*Ritchey Metals will adjust these specifications to suit the
needs of an individual customer upon request.

Properties

N/A

Availability

The following link is a technical drawing of our product in pdf format. You will need Adobe Acrobat to view this file.

Small Sow

Ritchey Metals routinely works with customers to alter our products to fit specific needs.
Note: V-12 is made as a 1200-lb 1/2 small sow.

Uses

V-12 Zinc Hardener Alloy is designed as a concentrated form of the Zinc Base Die Cast Alloy #3. The customer combines a 1200-lb. V-12 sow with 2 parts (~2400 lbs) Special High Grade Zinc to create the proper mix. For further information on mechanical/physical properties or uses, see Zinc Base Die Cast Alloy #3.