(400-441 Mpa)
(421 Mpa)
(372 Mpa)
(379 Mpa)
(290 Mpa)
(325 Mpa)
(172 Mpa)
(145 Mpa)
(331 Mpa)
(385 Mpa)
(77.9 Mpa x 103)
(125.5 W/m/hr/oC)
(26.0 microinches/mm/oC)
Specifications: ASTM B669*
| Element | Al% | Zn% | Mg% | Si% | Cu% | Fe% | Pb% |
| Maximum | 28.0 | BAL | 0.02 | X | 2.5 | 0.072 | 0.005 |
| Minimum | 25.5 | 0.012 | 2.0 | -- | -- | ||
| Element | Sn% | Cd% | Ni% | Mn% | Cr% | Ti% | Sb% |
| Maximum | 0.002 | 0.005 | 0.01 | 0.01 | 0.01 | X | X |
| Minimum | -- | -- | -- | -- | -- |
| Mechanical | Sand Cast | Die Cast | |
||||
| Ultimate Tensile Strength | 58-64 psi x 103 (400-441 Mpa) |
61 psi x 103 (421 Mpa) |
|||||
| Yield Strength - 0.2% Offset | 54 psi x 103 (372 Mpa) |
55 psi x 103 (379 Mpa) |
|||||
| Elongation | 3-6% in 2" | 1-3% in 2" | |||||
| Shear Strength | 42 psi x 103 (290 Mpa) |
47 psi x 103 (325 Mpa) |
|||||
| Hardness: Brinell | 110-120 | 105-125 | |||||
| Impact Strength | 35 ft-lb (47 J) | 43 ft-lb (58 J) | |||||
| (10 mm2 specimen unnotched) | |||||||
| Fatigue Strength Rotary Bend | 25 psi x 103 (172 Mpa) |
21 psi x 103 (145 Mpa) |
|||||
| 5 x 108 cycles | |||||||
| Comprehensive Yield Strength | 48 psi x 103 (331 Mpa) |
52 psi x 103 (385 Mpa) |
|||||
| 0.1% Offset | |||||||
| Modulus of Elasticity | 11.3 psi x 106 (77.9 Mpa x 103) |
||||||
| Physical | |||||||
| Density | 0.181 lb/in3 (5.0 g/cm3) | ||||||
| Melting Range | 708-903 oF (376-484 oC) | ||||||
| Electrical Conductivity | 29.7% IACS | ||||||
| Thermal Conductivity | 72.5 BTU/ft/hr/oF (125.5 W/m/hr/oC) |
||||||
| Coefficient of Thermal Expansion | 14.4 microinches/in/oF (26.0 microinches/mm/oC) |
||||||
| 68-212oF(100-200oC) | |||||||
| Specific Heat | 0.125 BTU/lb/oF (534 J/kg/oC) | ||||||
| Pattern or Die Shrinkage | 5/32 in/ft | 0.008 in/in | |||||
Bar Ingot Bundle - Self-palletizing or on wooden pallets
Margash Bundle - Self-palletizing or on wooden pallets
Small Sow
Ritchey Metals routinely works with customers to alter our products to fit specific needs.
